Semi-Automatic Controls - Bennett Marine AutoTrimPro Installation & User Manual

The ATP Helm Display features two
convenient buttons enabling boaters
to fully retract (raise), or fully
deploy (lower) both trims tabs with
one quick touch of a button.
• "ALL UP" Button: Pressing this
button will cause both tabs to
fully retract.
• "ALL DN" Button: Pressing
this button will cause both tabs to
fully deploy.
Using the "All DN" Button
When the ALL DN button is pressed
ATP will fully deploy the trim tabs.
The ATP controller will monitor the
position of the trim tabs and keep
trying to put them fully down until
the tabs have reached the full-down
position.
Fully Deploys (Lowers)Both Tabs
Bennett Marine AutoTrim Pro | Need help? Call (954) 427-1400

Semi-Automatic Controls

The ALL DN button provides a
quick and easy way to put the tabs
full down if the tabs are being used
in a manual mode.
CAUTION
The ALL DN Button will move the
trim tabs to the full-down position.
This can have a dramatic effect on
the attitude of the vessel as both tabs
are deployed. The tabs will deploy
at the same speed, so it is normal
for the tab that was deployed further
to reach its limit first. If the boat is
underway, the boat may react by a
sudden decrease in speed, or listing
as the tabs are brought into a full-
down position.
Use care when operating a vessel
with the trim tabs in a full-down
position. In some boats tabs in a full-
down condition can make the vessel
subject to bow steering at medium to
high speeds. Tabs should be brought
back up for high speed operation.
35