The D18 Functions Have Been Expanded, See "D18 – Reading System Data - HEIDENHAIN TNC 640 User Manual

New functions 34059x-06
Manual probe functions create a line in the preset table that
does not yet exist, see "Writing measured values from the
touch-probe cycles to the preset table", page 707
Manual probe functions can write in a password-protected line,
see "Recording measured values from the touch probe cycles",
page 705
The column AFC-LOAD was added to the tool table. In this
column you can set a tool-dependent standard reference power
for the adaptive feed control AFC, which you establish once
with a teach-in cut, see "Entering tool data into the table",
page 238
The column KINEMATIC has been added to the tool table, see
"Entering tool data into the table", page 238
When importing tool data the CSV file may contain additional
table columns not recognized by the control. During import a
message is displayed indicating the unrecognized columns and
informing that these values will not be adopted, see "Importing
and exporting tool data", page 274
New function FUNCTION S-PULSE for programming pulsing
shaft speeds, see "Pulsing spindle speed FUNCTION S-PULSE",
page 543
It is possible to search quickly for a file in file management by
entering the first letter, see "Selecting drives, directories and
files", page 177
With active structuring the structure block can be edited in the
structure window, see "Definition and applications", page 208
The D18 functions have been expanded, see "D18 – Reading
system data", page 395
The control differentiates between interrupted or stopped NC
programs. In the interrupted status, the control offers more
intervention options, see "Interrupting, stopping or aborting
machining", page 774
The machine manufacturer can also configure the turning
spindle (option number 50) as an optional axis on the
handwheel, see "Selecting the axis to be moved", page 676
Animated help can be selected with the tilt working plane
function, see "Overview", page 555
The software option number 42 DXF Converter now also
produces CR circles, see "Basic settings", page 331
New software option 136 Visual Setup Control (camera-based
monitoring of the setup situation), see "Software options",
page 9,see "Camera-based monitoring of the setup situation
VSC (option 136)", page 739.
20
Fundamentals | Control model, software and features
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017