Overview: Display Modes; 3-D View - HEIDENHAIN TNC 640 User Manual

19

Overview: Display modes

In the Program run, single block and Program run, full sequence
operating modes, as well as in Test Run operating mode, the
control displays the following soft keys:
Soft key
The position of the soft keys depends on the selected
operating mode.
The Test Run mode of operation also offers the following views:
Soft key
Limitations during program run
The simulation may contain errors if the control's
computing capacity is being fully utilized for complex
machining tasks.

3-D view

Choose 3-D view:
The high-resolution 3-D view enables you to display the surface of
the machined workpiece in greater detail. Using a simulated light
source, the control creates realistic light and shadow conditions.
Press the 3-D view soft key
756
View
Plan view
Projection in three planes
3-D view
View
Volume view
Volume view and tool paths
Tool paths
Test Run and Program Run | Graphics
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017