Define Behavior After Receipt Of Etx (Noeotafteretx No. 106710); Settings For The Transmission Of Data Using Pc Software Tncserver - HEIDENHAIN TNC 640 User Manual

MOD Functions | Setting up data interfaces
Define behavior after receipt of ETX
(noEotAfterEtx no. 106710)
With define behavior after reception of ETX (optional) you
determine whether the EOT character is sent after the ETX
character was received.
TRUE: The EOT character is not sent
FALSE: The EOT character is sent
Settings for the transmission of data using PC
software TNCserver
Apply the following settings in machine parameter RS232
(no. 106700):
Parameters
Data transfer rate in baud
Data transmission protocol
Data bits in each transferred
character
Type of parity checking
Number of stop bits
Specify type of handshake:
File system for file operations
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017
Selection
Has to match the setting in
TNCserver
BLOCKWISE
7 bits
EVEN
1 stop bit
RTS_CTS
FE1
20
809