Executing The Job List - HEIDENHAIN TNC 640 User Manual

15
In the Batch Process Manager you can move a line in the job list as
follows:
Open the desired job list
Press the EDIT soft key
Place the cursor on the desired line, e.g.
Program
The control displays the selected line in blue.
Press the MOVE soft key
Press the TAG soft key
The control highlights the line in which the cursor
is positioned.
Place the cursor on the desired position.
When the cursor is placed at a suitable position,
the control shows the INSERT BEFORE and
INSERT AFTER soft keys.
Press the INSERT BEFORE soft key
The control inserts the line at the new position.
Press the GO BACK soft key
Press the EDIT soft key

Executing the job list

You can execute the job list using the pallet management
Further information:
The control opens the job list as a pallet table in the pallet
management (.p).
622
"Processing pallet table", page 607
Batch Process Manager | Batch Process Manager (option 154)
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017