HEIDENHAIN TNC 640 User Manual page 412

10
Group Gruppen-
name nummerID
Read values from or write values to the active datum table
500
Read values from or write values to the preset table (basic transformation)
507
Read axis offsets from or write axis offsets to the preset table
508
Data for pallet machining
510
412
Systemdaten- Index
nummer
11 -
Row number Column
Row number 1-6
Row number 1-9
1 -
2 -
3 -
4 -
5 Axis
6 Axis
10 -
20 -
21 -
Programming Q Parameters | Additional functions
Description
Error status of probing:
0: Probing was successful
–1: Touch point not reached
–2: Touch probe already deflected at the start
of the probing process
Read values
Read values
Read values
Active line
Pallet number from the PAL/PGM field
Active row of the pallet table.
Last line of the NC program for the current
pallet.
Tool-oriented editing:
Clearance height is programmed:
0 = No, 1 = Yes
Index: 1 - 9 ( X, Y, Z, A, B, C, U, V, W )
Tool-oriented editing:
Clearance height
The value is invalid if ID510 NR5 returns the
value 0 with the corresponding IDX.
Index: 1 - 9 ( X, Y, Z, A, B, C, U, V, W )
Row number up to which the pallet table is to
be searched during block scan.
Type of pallet editing?
0 = Workpiece-oriented
1 = Tool oriented
Automatic continuation after NC error:
0 = Locked
1 = Active
10 = Abort continuation
11 = Continuation with the rows in the pallet
table that would have been executed next if
not for the NC error
12 = Continuation with the row in the pallet
table in which the NC error arose
13 = Continuation with the next pallet
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017