10
Tool measurement with the BLUM laser
Reserved
Reserved
Reserved
Reserved
Reserved for internal use
Marker for cycles
Marker for cycles
Marker for cycles (machining patterns)
Number of the last active measuring cycle
Status of tool measurement with TT
Tool within tolerance
Tool is worn (LTOL/RTOL is exceeded)
Tool is broken (LBREAK/RBREAK is exceed-
ed)
Checking the setup situation: Q601
The value of the parameter Q601 indicates the status of the
camera-based monitoring of the VSC setup situation.
Status
No error
Error
No monitoring area defined or not enough
reference images
Internal errs (no signal, camera fault, etc)
450
Programming Q Parameters | Preassigned Q parameters
Parameter value
Q190
Q191
Q192
Q193
Parameter value
Q195
Q196
Q197
Q198
Parameter value
Q199 = 0.0
Q199 = 1.0
Q199 = 2.0
Parameter value
Q601 = 1
Q601 = 2
Q601 = 3
Q601 = 10
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017