4
Programming tool movements in DIN/ISO
Press the SPEC FCT key to program a block. Press the
PROGRAM FUNCTIONS soft key, and then the DIN/ISO soft key. You
can also use the gray path function keys to get the corresponding G
code.
If you enter DIN/ISO functions via a connected USB
keyboard, make sure that capitalization is active.
Example of a positioning block
Enter 1 and press the ENT key to
COORDINATES ?
10 (enter the target coordinate for the X axis)
20 (enter the target coordinate for the Y axis)
Y
Go to the next question with ENT.
MILLINGDEFINITIONPOINTPATH
Enter 40 and confirm with ENT to traverse
without tool radius compensation,
Move the tool to the left or to the right of the
programmed contour: Press the G41 or G42 soft
key
162
Fundamentals, File Management | Creating and writing programs
or
HEIDENHAIN | TNC 640 | ISO Programming User's Manual | 10/2017