Configuring Tacacs+ On The Switch; Before You Begin - HP ProCurve 2910al Access Security Manual

TACACS+ Authentication

Configuring TACACS+ on the Switch

4-8

Configuring TACACS+ on the Switch

Before You Begin

If you are new to TACACS+ authentication, ProCurve recommends that you
read the "General Authentication Setup Procedure" on page 4-5 and configure
your TACACS+ server(s) before configuring authentication on the switch.
The switch offers three command areas for TACACS+ operation:
show authentication and show tacacs: Displays the switch's TACACS+
■
configuration and status.
aaa authentication: A command for configuring the switch's authentication
■
methods
tacacs-server: A command for configuring the switch's contact with
■
TACACS+ servers