HP ProCurve 2910al Access Security Manual page 497

Access Control
Max reqs
Quiet Period
TX Timeout
Supplicant Timeout
Server Timeout
Cntrl Dir
Port's authentication mode:
Auto: Network access is allowed to any connected device that supports 802.1X
authentication and provides valid 802.1X credentials.
Authorized: Network access is allowed to any device connected to the port,
regardless of whether it meets 802.1X criteria.
Unauthorized: Network access is blocked to any device connected to the port,
regardless of whether the device meets 802.1X criteria.
Number of authentication attempts that must time-out before authentication fails and
the authentication session ends.
Period of time (in seconds) during which the port does not try to acquire a supplicant.
Period of time (in seconds) that the port waits to retransmit the next EAPOL PDU
during an authentication session.
Period of time (in seconds) that the switch waits for a supplicant response to an EAP
request.
Period of time (in seconds) that the switch waits for a server response to an
authentication request.
Directions in which flow of incoming and outgoing traffic is blocked on 802.1X-aware
port that has not yet entered the authenticated state:
Both: Incoming and outgoing traffic is blocked on port until authentication occurs.
In: Only incoming traffic is blocked on port before authentication occurs. Outgoing
traffic with unknown destination addresses is flooded on the unauthenticated
802.1X-aware port.
Syntax: show port-access authenticator statistics [port-list]
Displays statistical information for all switch ports or spec­
ified ports that are enabled as 802.1X authenticators, includ­
ing:
• Whether port-access authentication is enabled
• Whether RADIUS-assigned dynamic VLANs are supported
• 802.1X supplicant's MAC address as determined by the
content of the last EAPOL frame received on the port
• 802.1X traffic statistics from received and transmitted
packets
802.1X configuration information for ports that are not
enabled as an 802.1X authenticators is not displayed.
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
12-57