HP ProCurve 2910al Access Security Manual page 122

Web and MAC Authentication
Configuring MAC Authentication on the Switch
ProCurve(config)# show port-access mac-based clients 1 detailed
Port Access MAC-Based Client Status Detailed
Client Base Details :
Port
Session Status : authenticated
Username
IP
Access Policy Details :
COS Map
Untagged VLAN
Tagged VLANs
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 3-14. Example of show port-access mac-based clients detail Command Output
3-38
Syntax: show port-access mac-based clients <port-list> detailed
Displays detailed information on the status of MAC-
authenticated client sessions on specified ports.
: 1
: client1
: n/a
: 12345678
: 4006
: 1, 3, 5, 6, 334, 4001
Session Time(sec) : 6
MAC Address
In Limit %
Out Limit %
: 0010b5-891a9e
: 98
: 100