Assigning Time-Dependent Keys To A Chain - HP ProCurve 2910al Access Security Manual

Figure 15-2. Example of Adding and Displaying a Time-Independent Key to a Key Chain Entry
[ accept-lifetime infinite ] [ send-lifetime infinite ]
show key-chain < chain_name >
For example, to generate a new time-independent key for the Procurve1 key
chain entry:

Assigning Time-Dependent Keys to a Chain

A time-dependent key has Accept or Send time constraints. It is valid only
during the times that are defined for the key . If a time-dependent key is used,
there is usually more than one key in the key chain entry.
Syntax: [no] key-chain < chain_name > key < key_id >
accept-lifetime infinite: Allows packets with this key to
be accepted at any time from boot-up until the key
is removed.
send-lifetime infinite: Allows the switch to send this
key as authorization, from boot-up until the key is
removed.
Displays the detail information about the keys used
in the key chain named < chain_name >.
Generates or deletes a key in the key chain entry
< chain_name >. Using the optional no form of the
command deletes the key. The < key_id > is any
number from 0-255.
Key Management System
Configuring Key Chain Management
Adds a new Time-Independent
key to the "Procurve1" chain.
Displays keys in the key chain
entry.
15-5