HP ProCurve 2910al Access Security Manual page 213

ProCurve (config)# show rate-limit all
Inbound Rate Limit Maximum %
Port | Limit
----- + -------- --------- ---------------
1 | Disabled Disabled
2 | 500
3 | 50
4 | Disabled Disabled
5 | Disabled Disabled
6 | Disabled Disabled
7 | Disabled Disabled
Figure 6-1. Example of Displaying Inbound Rate-Limiting Imposed by a RADIUS Session
RADIUS Server Configuration for Per-Port CoS (802.1p Priority) and Rate-Limiting
Syntax: show port-access authenticator [ port-list ]
show rate-limit all
show qos port-priority
These commands display the CoS and Rate-Limiting settings
specified by the RADIUS server used to grant authentication
for a given client on a given port. When the authenticated
client session closes, the switch resets these fields to the values
to which they are configured in the switch's running-config
file.
show port-access authenticator [ port-list ] displays, for 802.1X
authentication, the status of RADIUS-imposed overrides of
the switch's per-port CoS and Rate-Limiting configuration.
show rate-limit all displays, for all port-access authentication
methods (802.1X, Web-Auth, and MAC-Auth), the status of
RADIUS-imposed overrides of the switch's per-port Rate-
Limiting configuration.
show qos port-priority displays, for all port-access authentica­
tion methods (802.1X, Web-Auth, and MAC-Auth), the status
of RADIUS-imposed overrides of the switch's per-port CoS
(802.1p) priority for inbound packets.
Mode Radius Override
No-override
kbps 80
% No-override
No-override
No-override
No-override
No-override
Configuring RADIUS Server Support for Switch Services
Port 2 has a rate limit of 500 Kbps with no
RADIUS override.
Port 3 has a 50 percent rate limit, which is
50% of the port's available bandwidth.
The 80 in the Radius Override field indicates
that there is an active client session in which
the RADIUS server used to authenticate the
most recent client has imposed an inbound
bandwidth limit of 80%.
Disabled indicates that there is no default
rate-limit configured for the port. No­
override indicates that there is currently no
RADIUS-imposed rate-limit on the
associated ports.
6-7