HP ProCurve 2910al Access Security Manual page 111

ProCurve(config)# show port-access web-based
Port Access Web-Based Status
Auth
Port Clients
----- -------- -------- -------- ------
1 1
2 2
3 4
Figure 3-6. Example of show port-access web-based Command Output
ProCurve (config)# show port-access web-based clients
Port Access Web-Based Client Status
Port Client Name
----- ------------ -------------
1 webuser1
1 webuser2
1 webuser3
3 webuser4
Figure 3-7. Example of show port-access web-based clients Command Output
Unauth Untagged Tagged
Clients VLAN
1 4006
0 MACbased No
0 1
Syntax: show port-access web-based clients [port-list]
Displays the session status, name, and address for each web-
authenticated client on the switch. The IP address displayed
is taken from the DHCP binding table (learned through the
DHCP Snooping feature).
If DHCP snooping is not enabled on the switch, n/a (not
available) is displayed for a client's IP address.
If a web-authenticated client uses an IPv6 address, n/a - IPv6
is displayed.
If DHCP snooping is enabled but no MAC-to-IP address
binding for a client is found in the DHCP binding table, n/a
- no info is displayed.
MAC Address
0010b5-891a9e
001560-b3ea48
000000-111111
000000-111112
Port
VLANs COS
--------
Yes 70000000
Yes
Yes No
IP Address
--------------- -------------
192.192.192.192 Authenticated
n/a - no info
n/a - IPv6
n/a
Web and MAC Authentication
Configuring Web Authentication
% In RADIUS
Limit ACL
------ ------
100 Yes
Yes Yes
No No
Session Status
Authenticating
Authenticating
Authenticating
3-27