HP ProCurve 2910al Access Security Manual page 123

ProCurve(config)# show port-access mac-based config
Port Access MAC-Based Configuration
MAC Address Format : no-delimiter
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Port Enabled
----- -------- ------ ------ ------
1 No
2 Yes
...
Figure 3-15. Example of show port-access mac-based config Command Output
Syntax: show port-access mac-based config [port-list]
Displays the currently configured MAC Authentication
settings for all switch ports or specified ports, including:
• MAC address format
• Support for RADIUS-assigned dynamic VLANs (Yes or
No)
• Controlled directions setting for transmitting Wake-on-
LAN traffic on egress ports
• Authorized and unauthorized VLAN IDs
If the authorized or unauthorized VLAN ID value is 0, the
default VLAN ID is used unless overridden by a RADIUS-
assigned value.
Client Client Logoff
Limit Moves Period
1 No 300
1 No 300
Configuring MAC Authentication on the Switch
Re-Auth Unauth
Period VLAN ID
------- -------- -------
0 0
0 0
Web and MAC Authentication
Auth Cntrl
VLAN ID Dir
----
0 both
0 in
3-39