Software Operation; Menu Bar - Extron electronics XTP T HD 4K User Manual

Software Operation

Menu Bar

The menu bar contains three menus for configuring software settings.
File menu
The
exiting the program. To access the menu, click the
Figure 19.
Disconnect
This menu item disconnects the device from the XTP System Configuration Software.
From the
NOTE: If the device is already disconnected, the
Exit
This menu item disconnects the transmitter from the software and closes the application.
From the
Tools menu
The
Tools
Figure 20.
NOTE: The
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • XTP System Configuration Software
menu contains options for disconnecting from the transmitter or receiver and
File
File Menu
menu, select
File Disconnect
device is connected.
menu, select
File Exit
menu contains an option for updating firmware. To access this menu, click the
Tools
menu.
Tools Menu
Backup and Restore
not available when the computer is directly connected to the XTP T HD 4K or
XTP R HD 4K. See an XTP matrix switcher user guide (www.extron.com) for more
information on these features.
menu.
File
. The
Connections
Disconnect
to close the application.
and
Commissioning Report
screen opens.
item is disabled until a
options are
32