Table of Contents
Advertisement
FOX Extenders Control Program
The Extron FOX Extenders Control Program is available on the Extron website. The program
communicates with the transmitter and receiver pair via the Configuration port of either unit,
a 2.5 mm mini stereo jack (see
easy way to operate the pair.
The program is compatible with Windows 2000, Windows XP, or later.
Installing the Software
Download and install the FOX Extenders Control Program as follows:
NOTES:
1.
2 2 2 2
2 2 2 2
2 2
— OR —
2 2 2 2
2 2 2 2
2 2
2.
•
This procedure uses Windows Explorer. Depending on the browser you use, some
steps or indications may be different.
•
Steps 1 through 6 are also used to download firmware update packages.
Visit the website
www.extron.com
Figure 12.
Downloading a Software or Firmware Package
Click the
or
Software
Firmware
performing (
).
2
item
on page 10 and
item
G
and click the
Download
1 1 1 1
1 1 1 1
1 1
link as appropriate to the operation you are
FOXBOX Tx / Rx • Remote Control
on page 14), to provide an
Q
tab (see figure 12,
).
1
3 3 3 3
3 3 3 3
3 3
28
Advertisement
Table of Contents
