Transmitter Configuration - Extron electronics XTP T HD 4K User Manual

Transmitter Configuration

The transmitter
settings of the transmitter connected to the host device.
Transmitter device settings
Click the
Device Settings
open the
Device Settings
Figure 26.
Video panel
Video input — Select the
2
authorized device or deselect it to indicate that the device is not an HDCP authorized
device. By default, the check box is selected.
Video output — Select the
3
pattern to an XTP receiver or XTP matrix switcher or deselect it to stop transmitting a
test pattern to an XTP receiver or XTP matrix switcher. If selected, also select a signal
type from the
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • XTP System Configuration Software
screen allows a user to view and edit various device
Device Settings
icon (see figure 26,
screen.
Transmitter Device Settings Screen
HDCP Authorized
Color Bars Test Pattern
drop-down menu.
Signal Type
) on the
1
Global Navigation Bar
check box to set the input as an HDCP
check box to transmit a test
to
35