Factory reset
Factory Reset
(see figure 29 on the previous page) — Click the
7
button to reset the receiver to factory settings except for firmware (see mode 5 in
Modes
on page 19).
NOTE: This is the same as the
command on page 27).
Device Information panel
The
Device Information
information and settings.
Model — Displays the device model.
1
Firmware Version — Displays the firmware
2
and build version.
Signal Present — Indicates whether a
3
signal is present on the input.
Video Mute — Displays the mute status of
4
the video output.
HDMI Audio — Displays the mute status
5
of the embedded digital audio on the HDMI
output.
S/PDIF Audio — Displays the mute status of
6
the S/PDIF output.
Analog Audio — Displays the mute status of
7
the analog audio output.
Analog Audio Volume — Displays the analog
8
audio output volume level.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • XTP System Configuration Software
E
SIS command (see the
ZXXX
panel on the right side of the software screen displays device
Factory Reset
Reset
Reset mode
SIS
40