Power Connection
Apply power to the transmitter or receiver locally with the provided power supply (through
the rear panel DC power connector) or remotely (through the XTP connector) with a power
injector or a matrix switcher.
Local power
To power the transmitter or receiver locally, see figure 10 for wiring considerations.
Tie Wrap
(5 mm) Max.
Smooth
A
Power Supply
Output Cord
Figure 10.
See the
notifications
2-Pole Captive Screw
Connector
SECTION A–A
3/16"
Ridges
A
Power Wiring
on the next page for local power information and considerations.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Installation
13