System Compatibility; Control Methods; Features; Xtp Interconnection Features - Extron electronics XTP T HD 4K User Manual

Xtp extenders xtp 4k transmitter and xtp 4k receiver
Hide thumbs Also See for XTP T HD 4K:
Table of Contents

Advertisement

System Compatibility

The XTP T HD 4K and XTP R HD 4K are compatible with XTP Systems, but the maximum
video resolution may be limited with different twisted pair models. See the table below for
maximum video resolutions and refresh rates for various inputs and outputs.

Control Methods

To directly control either device, use one of the following methods:
Certain features can also be controlled through an XTP matrix switcher (see the XTP matrix
switcher user guide at www.extron.com).
NOTE: If the XTP T HD 4K or XTP R HD 4K is connected to an XTP matrix switcher,

Features

The following features apply to the XTP transmitter and receiver unless stated otherwise.

XTP Interconnection Features

Maximum Resolution and Refresh Rates for XTP Systems
Non-4K
Analog
1920x1200
@ 60 Hz
Non-4K Digital
2048x1080
@ 60 Hz
4K Fiber
2048x1080
@ 60 Hz
4K Twisted Pair
2048x1080
@ 60 Hz
4K PLUS
2048x1080
@ 60 Hz
Simple Instruction Set (SIS) commands (see
page 20)
XTP System Configuration Software (see
configure it through the XTP matrix switcher (see the XTP matrix switcher user guide
for SIS commands or the XTP System Configuration Help File for software details).
Reliable cable infrastructure — Transmits or receives video, audio, bidirectional
RS-232 and IR, and Ethernet over a shielded twisted pair cable to provide high reliability
and maximum performance on an economical and easily installed cable infrastructure.
Shielded twisted pair cable compatibility — Supports a maximum transmission
distance of 330 feet (100 meters) for all compatible resolutions when used with shielded
twisted pair cable. Shielded twisted pair cabling with solid center conductor sizes of
24 AWG or better is recommended for optimal performance.
Bidirectional RS-232 and IR insertion for AV device control — Inserts bidirectional
RS-232 control and IR signals into the XTP output, allowing a remote device to be
controlled without the need for additional cabling.
XTP T HD 4K Transmitter and XTP R HD 4K Receiver • Introduction
Output
4K Fiber
4K Twisted
Pair
1920x1200
1920x1200
@ 60 Hz
@ 60 Hz
2048x1080
2048x1080
@ 60 Hz
@ 60 Hz
4096x2160
4096x2160
@ 24 Hz
@ 24 Hz
4096x2160
4096x2160
@ 24 Hz
@ 30 Hz
4096x2160
4096x2160
@ 24 Hz
@ 30 Hz
SIS Configuration and Control
Configuration Software
4K PLUS
1920x1200
@ 60 Hz
2048x1080
@ 60 Hz
4096x2160
@ 24 Hz
4096x2160
@ 30 Hz
4096x2160
@ 60 Hz
on
on page 28)
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtp r hd 4k

Table of Contents