Hirschmann BAT450-F User Manual page 9

E marking

The labeled devices comply with the regulations contained in the following
European directive(s):
Regulation No. 10 of the Economic Commission for Europe of the United
Nations (UN/ECE): Devices with an approval are labeled with the
E type approval mark.
Devices are not specified for operation during the motor start phase.
CE marking

The labeled devices comply with the regulations contained in the following
European directive(s):
2011/65/EU (RoHS)
Directive of the European Parliament and of the Council on the restriction
of the use of certain hazardous substances in electrical and electronic
equipment.
2014/53/EU (RED)
Directive of the European Parliament and of the council on the
harmonization of the laws of the Member States relating to the making
available on the market of radio equipment.
Note: The RED compliance requires compliant operation of the device in
the 5 GHz band channels. Compliant operation of the device is achieved
by an unchangeable determination of the country setting. To obtain RED
compliance, perform the work steps described in chapter
compliance for operation in the European Union" on page
This product may be operated in all EU (European Union)
countries under the condition that it has been configured correctly.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be available to the relevant authorities at the following
address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
The product can be used in living areas (living area, place of business,
small business) and in industrial areas.
Note:
 Applies to the operation of devices in the 5.6 to 5.65 GHz band:
Install an antenna with an antenna gain of at least 3 dBi.
Installation BAT450-F
Release 06 08/2017
"Obtain
36.
9