Sim Card Reader (Exclusively For Device Variants With Lte Module) - Hirschmann BAT450-F User Manual

1.8 SIM card reader (exclusively for device
variants with LTE module)
There are 2 SIM card readers for 3.3 V SIM cards located on the left side of
the casing.
In order for the device to function properly, insert an activated SIM card with
the PIN code unblocked into the SIM card holder. Each SIM card can have a
different APN (Access Point Name).
Note: When changing the SIM Card, pay close attention to the following
rules:
 Disconnect the device from the power supply.
 Open the locking screws with a slot screwdriver or a coin.
 Use the flat end of a plastic screwdriver, or your fingernail, to press the
SIM card slightly deeper into the slot until you hear a click.
 After you hear a click, release the SIM card. The SIM card pops out of the
slot.
 Place the SIM card in the slot with the contacts face down.
26
Installation BAT450-F
Release 06 08/2017