7
Configuring the transmit power
You have the option to set the transmit power using LANconfig or (error in
org) Webconfig.
Use LANconfig or Webconfig to start the configuration of the device.
In the menu tree, open the Configuration > Wireless LAN > General
dialog.
In the "General" tab, specify in the "General" frame the country in which
you are installing the device.
If you are using an E-certified device in a vehicle and are driving the
vehicle within the EU, set the country profile for Germany. This country
profile is identical to all the country profiles for EU.
Click the "Set" button.
Note: For devices that are operated in the European Union perform the work
steps described in chapter
Union" on page
36.
In the menu tree, open the Configuration > Wireless LAN > General >
Physical WLAN settings - Radio dialog.
In the "General" tab, click in the "Interface" column the physical WLAN
interface to which you connect the antenna.
Installation BAT450-F
Release 06 08/2017
"Obtain compliance for operation in the European
39