Hirschmann BAT450-F User Manual page 22

Device variant with 2 × WLAN modules or 1 × WLAN module

without LTE module
Power LS/DA
WLAN 2
WLAN 1
Power
Color Activity
Green Lights up
Red flashing
green/red Short flashing
green/red Long flashing
WLAN 1, WLAN 2
Color Activity
— off
Green flashing
Green Inverse flashing
Green flashing
Red flashing
Device variant with 1 × WLAN module and 1 × LTE module

Power LS/DA
WLAN 1 LTE
Power
Color Activity
Green Lights up
Red flashing
green/red Short flashing
green/red Long flashing
22
Meaning
LED lights up after the configuration
Device has detected at least one hardware error.
No password or the default password is set
Charge lock active
Meaning

No WLAN network specified
 WLAN module deactivated

WLAN module does not send any beacons
 At least one WLAN network defined

WLAN module activated
Number of flashes corresponds to number of connected
WLAN stations and P2P radio lines.
 DFS scanning or another scan procedure

Display of signal strength in client or P2P
Device has detected at least one hardware error.
Meaning
LED lights up after the configuration
Device has detected at least one hardware error.
No password or the default password is set
Charge lock active
Installation BAT450-F
Release 06 08/2017