Ls/Da; Management Interfaces 1.7.1 V.24 Interface (External Management) - Hirschmann BAT450-F User Manual

WLAN
Color Activity
— off
Green flashing
Green Inverse flashing
Green flashing
Red flashing
LTE
Color Activity
— —
1.6.2

LS/DA

These LEDs display port-related information. During the boot phase, they
indicate the status of the boot process.
LS/DA
Color Activity
— off
Green Lights up
green/yellow flashing
Yellow Lights up
1.7 Management interfaces
1.7.1 V.24 interface (external management)
This interface is a 4-pin, "A"-coded M12 socket.
This interface is serial and enables the local connection of an external
management station (VT100 terminal or PC with corresponding terminal
emulation). This enables you to set up a connection to the Command Line
Interface CLI and to the System Monitor.
VT 100 terminal settings
Speed
Data
Stopbit
Handshake
Parity
Installation BAT450-F
Release 06 08/2017
Meaning
 No WLAN network specified

WLAN module deactivated

WLAN module does not send any beacons

At least one WLAN network defined

WLAN module activated
Number of flashes corresponds to number of connected
WLAN stations and P2P radio lines.
 DFS scanning or another scan procedure

Display of signal strength in client or P2P
Device has detected at least one hardware error.
Meaning
No function in the existing device version.
Meaning
No network device connected
1 Ethernet connection active
Device is transmitting and/or receiving data
2 Ethernet connections active
9600 Baud
8 bit
1 bit
off
none
23