Connecting Lan And Wlan Connectors; Bat-F; Bat-Rail - Hirschmann BAT series User Manual

2.9

Connecting LAN and WLAN connectors

In the "Dual-Band Industrial Access Point / Client / Access Bridge BAT54-
Rail" user manual, you will find further information for connecting the LAN
and WLAN connections with the corresponding remote terminals.
2.9.1

BAT-F

 Connect the access point to your LAN for configuration.
 Assemble the network cable with the M12 plug supplied.
 Plug the network cable into the LAN connector of the device, and into a
free network connection port on your local network (or into a free port on
a hub/switch). Alternatively, you can connect the device to a separate PC.
The port auto-negotiates upon connection; either a straight or a crossover
cable can be used.
2.9.2

BAT-Rail

 Connect the access point to your LAN for configuration.
 Plug the network cable into the LAN connector of the device, and into a
free network connection port on your local network (or into a free port on
a hub/switch). Alternatively, you can connect the device to a separate PC.
The port auto-negotiates upon connection; either a straight or a crossover
cable can be used.
42
Installation BAT
Release 05 03/2013