Hirschmann BAT450-F User Manual page 13

Note (2): Connect the BAT-ANT-N-MiMo-18N-IP65 antenna to the WLAN
module as follows:
 Connect the antenna port "Ver" with the WLAN antenna port 1.
 Connect the antenna port "+45°" with the WLAN antenna port 2.
 Connect the antenna port "−45°" with the WLAN antenna port 3.
 Connect the BAT-ANT-N-MiMo-18N-IP65 in this way exclusively.
Differing connection configurations are illegal.
Note for the use in Oman

This note applies to BAT450-F variants with the characteristic
value OM (Oman) for country approvals:
This telecommunication equipment complies with the technical
requirements of the Telecommunications Regulatory Authority (TRA) and
is labeled as follows:
OMAN - TRA
R/4116/17
D100428
Recycling note

After usage, this device must be disposed of properly as electronic waste,
in accordance with the current disposal regulations of your county, state,
and country.
Installation BAT450-F
Release 06 08/2017
13