Assembly And Installation - WAGNER Cobra 40-10 Translation Of The Original Operating Manual

VERSION 07/2014
OPERATING MANUAL
6.5

ASSEMBLY AND INSTALLATION

Note:
This pump can be used as part of a spraying system for Airless or AirCoat applications.
The components can be found in the accessories list, provided that the system was not
obtained as a spray pack.
The nozzles must be selected according to the gun instructions.
Procedure:
1 Mount the pump on a frame, trolley (6),
or wall mount.
2 For AirCoat systems:
additional fi lter pressure regulator (7)
(option).
3 Mount suction system (5).
4 Mount return hose (4) (option).
5 Connect high-pressure hose and spray
gun (2) as described in the operating
manual.
Inclined ground!
Risk of accidents if the device rolls away/falls.
ORDER NUMBER DOC2340851
2
Mount the
WARNING
Position the trolley with the piston pump horizontally.
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
6
1
B_04239
7
4
5
27