Work; Pressure Relief/Work Interruption - WAGNER Cobra 40-10 Translation Of The Original Operating Manual

VERSION 07/2014
OPERATING MANUAL
7.4

WORK

Positions of the ball valve
1 Open: working position
2 Closed: The air motor can still be under pressure.
3 Vent: Operating pressure in the air motor is
vented (control pressure is still present).
1 Secure gun and place nozzle in the gun.
2 Slowly open the ball valve.
3 Set the required working pressure on the pressure
regulator.
4 Optimize the spraying results as laid down in the gun instructions.
5 Start work process.
Note: Depending on the function, the pump may continue running for 1 - 6
the spray gun is closed.
7.5

PRESSURE RELIEF/WORK INTERRUPTION

7.5.1
PRESSURE RELIEF/WORK INTERRUPTION
The pressure must always be relieved when:
- the spraying tasks are fi nished,
- servicing the system,
- carrying out cleaning tasks on the system,
- moving the system to another location,
- something needs to be checked on the system or
- the nozzle is removed from the gun.
Observe general safety instructions in Chapter 4.
ORDER NUMBER DOC2340851
3
2
1
/min. after
B_04301
36