WAGNER Cobra 40-10 Translation Of The Original Operating Manual page 46

VERSION 07/2014
OPERATING MANUAL
Vent
Procedure:
1 Turn the pump upside down. Remove the threaded plug (5).
2 Slowly start up (vent) the pump until no air bubbles appear from the oil suction
fi tting.
3 Oil level A in the oil tank has to be within the specifi ed markings (X).
4 Screw in threaded plug (5) and tighten with 2 Nm; 1.5 lbft.
5 Mount piston cover (1) and hood with casing.
6 The device is ready for operation again.
5
ORDER NUMBER DOC2340851
A
B_04243
B_04247
5
9
1
46