VERSION 07/2014
OPERATING MANUAL
5
DESCRIPTION
5.1
DESIGN
Cobra 40-10
1
4
6
7
13
8
Cobra 40-25
1
4
6
3
7
13
5.2
MODE OF OPERATION
5.2.1
GENERAL INFORMATION
The double diaphragm pump is driven with compressed air. This compressed air moves the air piston in the air
motor (4), and consequently the piston rod in the pressure stage (9), up and down. At the end of each stroke
the compressed air is redirected by a reversing valve and the control piston. The up-and-down movement of
the 2 diaphragms within the fl uid section is produced by hydraulic oil, which is moved by the piston in the
pressure stage. With every stroke of the piston rod, working material is sucked in and delivered to the spray
gun at the same time.
5.2.2
AIR MOTOR (4)
The air motor with its pneumatic reverse (1) does not require pneumatic oil.
The compressed air is fed to the motor via the air pressure regulator (2) and the ball valve (3).
5.2.3
PROTECTIVE AND MONITORING EQUIPMENT
The air motor is fi tted with a safety valve. The safety valve has been set and sealed at the factory. In case
of pressures over and above the permissible operating pressure, the valve, which is held with a spring,
automatically opens and releases the excess pressure.
ORDER NUMBER DOC2340851
2
5
3
9
10
14
B_04237
2
5
8
9
10
14
B_04238
1
Control housing with integrated silencer
2
Air pressure regulator
3
Ball valve
11
12
4
Air motor
15
5
Compressed air inlet
6
Mounting fl ange
7
Relief valve
8
Product outlet
9
Fluid section
10
Product inlet
11
Grounding connection
12
Pressure stage casing
13
Return socket
14
Valve depressor
15
Exhaust air cap
11
12
15
18