Table of Contents
Advertisement
Operating manual Pneumatic double diaphragm pump TOPFINISH DD10 Alu NiP
6 Assembly and Commissioning
6.5 ASSEMBLY AND INSTALLATION
WARNING
Inclined ground!
Risk of accidents if the device rolls away/falls.
4 Position the trolley with the double diaphragm pump horizontally.
4 If the floor is inclined, position the feet of the trolley towards the gradient.
4 Secure the trolley.
Info
Ensure that the national explosion prevention rules and regulations are observed when
setting up the device.
2
1. Mount the pump on a frame, trolley or wall mount.
2. Connect the suction system and air supply.
3. Connect the material and air supply of the gun in accordance with the operating
manual.
This pump can be used as part of a spraying system for AirSpray applications. The
components can be found in the accessories list, provided that the system was not obtained
as a spray pack. The nozzles must be selected according to the spray gun instructions.
Positioning
The pump can be mounted in any position. Ensure that all fastening screws are properly
tightened.
Order number DOC 2366672 | Edition 08/2020
1
B_05376
3
25
Advertisement
Table of Contents
