VERSION 07/2014
OPERATING MANUAL
6.5
ASSEMBLY AND INSTALLATION
Note:
This pump can be used as part of a spraying system for Airless or AirCoat applications.
The components can be found in the accessories list, provided that the system was not
obtained as a spray pack.
The nozzles must be selected according to the gun instructions.
Procedure:
1 Mount pump (1) on trolley (6) or wall mount.
2 For AirCoat systems (picture below): Mount the additional fi lter pressure regulator (7)
(option).
3 Mount suction systems (5).
4 Connect return hoses (4) of the suction system to return valves (3).
5 Connect the high-pressure hose of the gun (2) to statics mixers (8) and when using the
AirCoat process connect air hose to fi lter pressure regulator (7).
Inclined ground!
Risk of accidents if the device rolls away/falls.
ORDER NUMBER DOC2349980
2
WARNING
Position the trolley with the piston pump horizontally.
If the surface is inclined, position the feet of the trolley towards
the gradient.
Secure the trolley.
1
7
3
4
5
8
B_05079
6
27