Troubleshooting; Technical Fiche - Heinner HEM-150BK Instruction Manual

www.heinner.com
VII. TROUBLESHOOTING
Symptom
Carafe leakage water or
water leaks out from lid of
carafe
The metal parts in the tank
have rust.
Water leaks from
bottom of coffee maker.
Water leaks out of outer
side of filter.
Acid (vinegar) taste exists in
Espresso coffee.
The coffee maker cannot
work any more.
The steam cannot froth.
VIII. TECHNICAL FICHE
Cause
The carafe is not located
properly
The level of water in the tank
exceeds the scale of MAX.
The descaler
recommended type. It may
corrode the metal parts in the
tank.
There is much water in the drip
the
tray.
The coffee maker
malfunction.
There is some coffee powder
on filter edge.
No clean correctly
cleaning mineral deposits.
The coffee powder is stored in
a hot, wet place for a long time.
The coffee powder turns bad.
The power outlet is not plugged
well.
The steam ready indicator
(green indicator)
illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk
800W, 50Hz, 230V
Let centreline of carafe aligns with
leakage opening of brew basket well.
The water level in the tank should be
within the scale of MIN and MAX.
is not
Use the descaler recommended by
manufacturer.
Please clean the drip tray.
is Please contact with the authorized
service facility for repairing.
Get rid of them.
after Clean coffee maker per the content in
"before the first use" for several times.
Please use fresh coffee powder, or store
unused coffee powder in a cool, dry
place. After opening a package of coffee
powder, reseal it tightly and store it in a
refrigerator to maintain its freshness.
Plug the power cord into a wall outlet
correctly, if the appliance still does not
work, please
authorized service facility for repairing.
Only after the steam ready indicator
is not (green indicator) is illuminated, the
steam can be used to froth.
Use high and narrow cup.
Use whole milk or half-skimmed milk
Corrections
contact with the
8