Troubleshooting - Heinner HEM-DL1470BK Instruction Manual

Espresso maker with frothing device
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 22
www.heinner.com
VIII. TROUBLESHOOTING
PROBLEM
Coffee does not come out.
Coffee comes out around
the edge of the porta-filter.
Milk is not foamy after
frothing or it is not coming
out of the frothing tube
Coffee comes out too
quickly
Coffee is too weak.
The three control panel
lights are flashing
alternatively
CAUSES
1. No water in reservoir.
2. Coffee grind is too fine.
3. Too much coffee in the filter.
4. Appliance was not turned on or
plugged in.
5. Coffee has been
tamped/compressed too much.
1. Porta-filter not rotated to full
lock position.
2. Coffee grounds around the filter
basket rim.
3. Too much coffee in the filter.
1. Ran out of steam
2. Milk is not cold enough.
3. Frothing tube is blocked.
1. Ground coffee is too coarse.
2. Not enough coffee in filter.
1.
Using small filter for double
shot of espresso
2.
Ground coffee is too coarse.
Water tank is out of water
1230-1470W, 50Hz, 220-240V
SOLUTIONS
1. Add water
2. Grind medium ground
coffee.
3. Fill filter with less coffee.
4. Plug unit into electrical
outlet and turn it on.
5. Refill filter basket with
coffee, do not tamp too
much.
1. Rotate filter holder to full
lock position.
2. Wipe off rim
3. Fill with less coffee.
1. Ensure there is enough
water in the reservoir.
2. Chill milk and frothing
pitcher prior to making
cappuccino.
3. Follow the instructions to
clean the milk reservoirs
&frothing tube.
1. Use a finer grind.
2. Use more coffee.
1. Use large filter for double
shot of espresso
2. Use a finer grind.
Add water to reservoir.
37

Advertisement

Table of Contents
loading

Table of Contents