Troubleshooting - Heinner HEM-200BL Instruction Manual

Espresso maker charm
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
www.heinner.com
VII. TROUBLESHOOTING
Symptom
Carafe leakage water or
water leaks out from the
lid of the carafe
The metal parts in the
tank have rust.
Water leaks from the
bottom of the Espresso
maker.
Water leaks out from the
outer side of the filter.
Acid (vinegar) taste exists
in Espresso coffee.
The coffee maker doesn't
work.
Cause
The carafe is not located
properly
The level of the water in the
tank exceeds the MAX scale.
The descaler type is not the
recommended one. It may
corrode the metal parts in
the tank.
There is too much water in
the drip tray.
The
Espresso
maker
malfunctions.
There is some coffee powder
on filter edge.
The
clean
was
done
incorrectly
after
cleaning
mineral deposits.
The coffee powder is stored
in a hot, wet place for a long
time. The coffee powder
turns bad.
The power outlet is not
plugged well.
800W, 50Hz, 230V
Corrections
Let the centreline of carafe to
align with the leakage opening
of the brew basket well.
The water level in the tank
should be within the scale of
MIN and MAX.
Use
the
descaler
recommended
by
manufacturer.
Please clean the drip tray.
Please contact the authorized
service facility for repairing.
Get rid of them.
Clean the coffee maker per the
content in "before the first use"
for several times.
Please use fresh coffee powder,
or store unused coffee powder
in a cool, dry place. After
opening a package of coffee
powder, reseal it tightly and
store it in a refrigerator to
maintain its freshness.
Plug the power cord into a wall
outlet correctly, if the appliance
still does not work, please
contact with the authorized
service facility for repairing.
type
the
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hem-200grHem-200bg

Table of Contents