Heinner HEM-150BK Instruction Manual page 5

www.heinner.com
V. USING INSTRUCTION
 Before the first use:
1. Remove the coffee maker from the package, and check the accessories according
to the list.
2. Clean all the detachable components according to the following section of
"CLEANING AND MAINTENANCE". Then assemble them completely.
3. Ensure the steel mesh place in position. Place the carafe on removable shelf.
4. Operation the appliance according to the section of "B" and "C" (no coffee powder
in steel mesh). Repeat 2-3 times.
PRESSURE WARNING: Never open the tank cover or remove the metal funnel during
operation or when there is pressure in the tank.
 MAKE ESPRESSO COFFEE:
1. Remove the tank cover by turning it in anti-clockwise. Pour appropriate water in water
tank with the carafe. Do not exceed the maximum capacity.
Note: before pouring the water into the water tank, be sure the power cord is unplug from
the power outlet and the steam knob is in the OFF/RELEASE position.
2. Replace the tank cover in place by turning the cover in clockwise until it locks in position.
3. Put the steel mesh into metal funnel. Add coffee powder to steel mesh with measuring
spoon, a spoon coffee powder can make about a cup of top-grade coffee. Then press the
coffee powder tightly with the tamper.
Note: select your desired coffee powder to make desired cups coffee, the steel mesh has 2
cups and 4 cups marks.
4. Make sure the tubers on the funnel align with the grooves in the appliance, then insert the
funnel into from the "INSERT" position, and you can fix the funnel into coffee maker firmly
through turn it anti-clockwise until it is locked in the "LOCK" position (see Fig. 1).
800W, 50Hz, 230V
4