Troubleshooting - Heinner HEM-250 User Manual

www.heinner.com
VII. TROUBLESHOOTING
Symptom Cause
Water leaks There is much water in the drip
from the tray.
bottom of
coffee maker.
The coffee maker is malfunction.
Water leaks out There is some coffee powder on
of outer side of filter edge.
filter.
Acid (vinegar) No clean correctly after cleaning
taste exists in mineral deposits.
Espresso
coffee.
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad.
The coffee The power outlet is not plugged
maker cannot well.
work any more.
The steam The steam ready indicator is not
cannot froth. illuminated.
The container is too big or the
shape is not fit.
You have used skimmed milk
1050W, 50-60Hz, 220-240V
Corrections
Please clean the drip tray.
Please contact with the authorized
service facility for repairing.
Get rid of them.
Clean coffee maker per the content
in "before the first use" for several
times.
Please use fresh coffee powder, or
store unused coffee powder in a
cool, dry place. After opening a
package of coffee powder, reseal it
tightly and store it in a refrigerator
to maintain its freshness.
Plug the power cord into a wall
outlet correctly, if the appliance
still does not work, please contact
with the authorized service facility
for repairing.
Only after the steam
indicator is illuminated, the steam
can be used to froth.
Use high and narrow cup.
Use whole milk or half-skimmed
milk
ready
26