Table of Contents
Advertisement
Chapter 4. The Configuration Menus
Configuration Overview
This section describes the configuration menus. The Configuration Main Menu
options and all of the submenu options are illustrated in menu diagrams and
described in detail. For procedures showing how to enter Program mode, save,
recall, and print configurations, refer to Chapter 3, "Configuring the Printer," on
page 19.
Figure 15 on page 40 shows an overview of the configuration menus.
The configuration menu diagram on page 40 shows the structure of the
configuration menus and the parameter options available in each menu. The
diagrams list the menus and options in the order they appear when you use the
operator panel to configure the printer. Factory default configuration values are
indicated by an asterisk (*).
Pressing the operator panel keys (ENTER, RETURN, SCROLL/MICRO, and
choices for the options, as follows:
v The ENTER key allows you to move down to a lower level in the menu
v The RETURN key moves you back up the menu structure.
v The SCROLL/MICRO key moves forward through the options at a particular
v The SCROLL/MICRO key moves backward through the options at a particular
These keys are summarized in a legend box at the lower right corner of each
configuration menu diagram.
© Copyright InfoPrint Solutions Company 2005, 2010
The menus that are displayed from the operator panel are determined by the
installed features. For example, if you ordered the IPDS feature, then the IPDS
menu would appear on the operator panel. If the IPDS feature is not installed,
then the IPDS menu will not appear on the operator panel.
Each feature is shipped with a document that describes the feature in detail.
For more information about these documents, see "Related Documents" on
page xiv.
SCROLL/MICRO) allows you to move through the menus and select various
structure, and to select an option value as the active value.
menu level.
menu level.
39
Advertisement
Table of Contents
