Table of Contents
Advertisement
Page Format
Margins
v Left Margin. Defines where the first print column is located. The left margin is
v Right Margin. Defines where the last print column is located. The right margin
v Top Margin. Defines the location of the first print line on the page. The top
v Bottom Margin. Defines the location of the last print line on the page. The
Form Length
Specifies the form length in lines. The maximum form length in lines depends on
the current LPI setting; it is equal to the maximum form length in inches
multiplied by the current LPI setting. For example, at 6 LPI the maximum form
length is 6 LPI x 24 inches = 144 lines.
Only valid form length values will be accepted. If you select a length that is larger
than the maximum length for the current LPI, the maximum length will be used. If
you need a longer page length, you must first change the LPI. The default is 66
lines.
IMPORTANT: If the form length is set in lines and you change the LPI, the
Note: Receipt of a data stream control code which changes the form length
Form Width
Allows you to input the form width in characters from 1 through 272. The
maximum form width in characters depends on the current CPI setting; it is equal
to the maximum form width in inches multiplied by the current CPI setting.
Only valid form width values will be accepted. If a width is selected that is larger
than the maximum width for the current CPI, then the maximum width will be
used. If a larger width value is desired, then the CPI value must be changed first.
The default is 136 lines.
146
InfoPrint 6500-V User's Manual
specified as the number of characters from the left edge of the form.
is specified as the number of characters from the right edge of the form.
margin is specified as the number of lines from the top of the form's position.
bottom margin is specified as the number of lines from the bottom of the form's
position.
effective page length changes to the form length in characters
divided by the new LPI.
overrides the form length previously specified via the operator panel.
Advertisement
Table of Contents
