Character Sets - InfoPrint 6500-v05 User Manual

Character Sets

This parameter selects a character set for the Epson emulation, as shown in the
"Epson Emulation Menu" on page 169. To use one of these sets, choose the desired
group heading (such as 0862 Hebrew) and press ENTER. Character sets are shown
in detail in the Character Sets Reference Manual.
Epson Print Language
Epson print language specifies the set of print languages used by the printer. Refer
to "Epson Emulation Menu" on page 169 for print language menus.
Define CR Code (Carriage Return)
The Define CR Code option controls the action of the printer when it receives a
Carriage Return code (X'0D') from the host computer. If this feature is enabled,
each time the printer receives a carriage return, it inserts an additional Line Feed
code (X'0A') into the data stream. Do not use this feature if the host computer
sends line feeds to the printer.
v CR = CR (the default). Does not insert an extra line feed after each carriage
v CR = CR + LF. Inserts an extra line feed after each carriage return.
Auto LF
This option defines the printer actions when print data is received past the forms
width setting.
v Enable (the default). Performs an automatic carriage return and line feed when
v Disable. Discards any data past the forms width.
Define LF Code (Line Feed)
The Define LF Code option controls the action of the printer when it receives a
Line Feed code (X'0A') from the host computer. If this feature is enabled, each time
the printer receives a Line Feed, it inserts an additional Carriage Return code
(X'0D') into the data stream. This feature is required if the host computer does not
send carriage returns to the printer.
v LF = LF (the default). Does not add a carriage return with a line feed.
v LF = CR + LF. Adds an extra carriage return with each line feed.
Printer Select
v Disable (the default). Ignores the ASCII DC1 and DC3 control codes.
v Enable. Disables the printer when a DC1 control code is received, and enables
170
InfoPrint 6500-V User's Manual
return.
data is received past the forms width.
the printer when a DC3 control code is received.