Table of Contents
Advertisement
Ribbon End Point
This parameter adjusts the point at which the system will declare the ribbon as
being expended. The life count will always be from 100% to 0%, but if a darker
setting is selected 0% will be reached more quickly. If a lighter setting is selected,
the system will extend the time it takes to reach 0%. The range of values are as
follows:
v −4 (the default)
v Normal
v Darker +1 through Darker +6
v Lighter −1 through Lighter −10
Note: This value can be adjusted at any time and the display will automatically
adjust to show the correct percentage relative to the new end point.
Ribbon Action
v Stop Ribbon End (the default). Stops ribbon action when ribbon life reaches 0%.
v Ignore Ribbon End When selected, the ribbon life display remains on the
control panel, and the printer continues to monitor ink consumption.
Chapter 4. The Configuration Menus
53
Advertisement
Table of Contents
