Appendix D. Attaching Host Systems To A Coax/Twinax Printer; Attaching Printer To An Ibm System I Or Zseries Host System; Attaching Printer To An Ibm System I Host System; Attaching Printer To An Ibm System I With Twinax Interface - InfoPrint 6500-v05 User Manual
6500-v series, line matrix printers, cabinet and pedestal models
Table of Contents
Advertisement
Appendix D. Attaching Host Systems to a Coax/Twinax Printer
Attaching Printer to an IBM System i or zSeries Host System
The following information describes how to attach this printer to a zSeries or IBM
System i
If you are installing this printer with the IPDS feature, review the InfoPrint 6500
IPDS Programmer's Reference Manual for information on attaching a printer to host
systems using IPDS.
Attaching Printer to an IBM System i Host System
This chapter provides specific instructions on attaching the printer to your
computer.
Supported host workstations include:
v IBM System i
v 5294, 5394, and 5494 Remote Control Units
Attaching Printer to an IBM System i with Twinax Interface
1. Formerly known as iSeries.
© Copyright InfoPrint Solutions Company 2005, 2010
®1
System.
DANGER:
<4>
Do not connect or disconnect any communication port, teleport, attachment
connector, or power cord during an electrical storm.
<5>
Power off the printer and disconnect the power cord before connecting of
disconnecting communication port, teleport, or attachment cable connector.
273
Advertisement
Table of Contents
