Attaching Printer To Remote Control Unit With Twinax Interface - InfoPrint 6500-v05 User Manual

Attaching Printer to Remote Control Unit with Twinax Interface

IBM System i auto configuration program does not support remote attached
printers. You must manually configure this printer as a remote printer attached to
a 5294, 5394, or 5494 Remote Control Unit. Use the following parameters when
configuring this printer as a remote printer on IBM System i:
Parameter Description
Device description
Device class
Device type
Device type
Device model
Advanced Function
Location Address
Online at IPL
Attached controller
Font identifier
Form feed
Note: AFP *Yes can be specified if the level of iSeries supports the printer as an
276
InfoPrint 6500-V User's Manual
Parameter Parameter Setting
DEVD Workstation printer name
DEVCLS *RMT
TYPE *IPDS (When printer is set to 4234-12 mode.)
TYPE 4234 (When printer is set to 4234-2 mode.)
MODEL 0000 (00 if IPDS (4234-12) and 02 if SCS (4234-2))
Type can be set to 6408 or 6412.
CTA for 6408 or 6412 model.
AFP *NO (See Note)
LOCADR xx
ONLINE *YES
CTL Remote controller name
FONT yyy (Default font identifier)
FORMFEED * Cont
AFP printer and PSF is installed.