Inter-Relay Communications - GE N60 Instruction Manual

SPECIFICATIONS
FIBER ETHERNET PORT
Parameter
Wavelength
Connector
Transmit power
2 Receiver sensitivity
Power budget
Maximum input power
Typical distance
Full duplex
Redundancy
ETHERNET (10/100 MB TWISTED PAIR)
Modes:
Connector:
SIMPLE NETWORK TIME PROTOCOL (SNTP)
Clock synchronization error:
PRECISION TIME PROTOCOL (PTP)
PTP IEEE Std 1588 2008 (version 2)
Power Profile (PP) per IEEE Standard PC37.238TM2011
Slave-only ordinary clock
Peer delay measurement mechanism
PARALLEL REDUNDANCY PROTOCOL (PRP)
(IEC 62439-3 CLAUSE 4, 2012)
Ethernet ports used:
Networks supported:
OTHER
TFTP, SFTP, HTTP, IEC 60870-5-104, Ethernet Global Data (EGD), IEEE C37.118

2.5.9 Inter-relay communications

SHIELDED TWISTED-PAIR INTERFACE OPTIONS
Interface type
RS422
G.703
RS422 distance is based on transmitter power and does not take into consideration the clock source provided by
the user.
LINK POWER BUDGET AND MAXIMUM OPTICAL INPUT POWER
The following specifications apply to filter interface modules manufactured from January 2012.
Emitter, fiber type
820 nm, Multimode
2-28
Fiber type
100 Mb multimode
1310 nm
LC
–20 dBm
–30 dBm
10 dB
–14 dBm
2 km
yes
yes
10 Mb, 10/100 Mb (auto-detect)
RJ45
<10 ms (typical)
2 and 3
10/100 Mb Ethernet
Typical distance
1200 m
100 m
Cable type Transmit power Received
62.5/125 μm -16 dBm
50/125 μm -20 dBm
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
Power budget Maximum
sensitivity
-32 dBm 16 dBm
12 dBm
CHAPTER 2: PRODUCT DESCRIPTION
optical input
power
-8 dBm