Front Panel Interface; Front Panel Display - GE N60 Instruction Manual
Network stability and synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
CHAPTER 4: INTERFACES
FRONT PANEL INTERFACE
4.2 Front panel interface
This section explains use of the front panel, including how to customize the labels.
4.2.1 Front panel display
Messages display on a backlit liquid crystal display (LCD) to make them visible under poor lighting conditions. When the
keypad and display are not actively being used, the display defaults to user-defined messages. Any high-priority event-
driven message overrides the default messages and displays.
Settings files conversion from previous firmware versions is supported.
Up to 20 characters can be used to configure some setting names in the software, while up to 12 characters display on the
front panel. A tilde ~ symbol is used for the twelfth character on the front panel when a name extends beyond the 12
character limit. An example is shown for a Virtual Input.
Figure 4-17: Tilde symbols displays with names 12 or more characters long
4
The front panel can be viewed and used in the EnerVista software, for example to view an error message displayed on the
front panel.
To view the front panel in EnerVista software:
1.
Click Actual Values > Front Panel.
Figure 4-18: Front panel use in the software (C60 shown)
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
4-15
Advertisement
Table of Contents
