GE N60 Instruction Manual page 130
Network stability and synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (602 pages)
Table of Contents
Advertisement
FRONT PANEL INTERFACE
2.
Slide the label tool under the LED label until the tabs snap out as shown. This attaches the label tool to the LED label.
3.
Remove the tool and attached LED label as shown.
4
4.
Slide the new LED label inside the pocket until the text is properly aligned with the LEDs, as shown.
To remove the user-programmable pushbutton labels from the N60 enhanced front panel and insert the custom labels:
1.
Use the knife to lift the pushbutton label and slide the tail of the label tool underneath, as shown. Ensure that the bent
4-26
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 4: INTERFACES
Advertisement
Table of Contents
