GE N60 Instruction Manual page 94
Network stability and synchrophasor measurement system
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (602 pages)
Table of Contents
Advertisement
ADD DEVICE TO SOFTWARE
3.
Click the Quick Connect button to open the window.
3
4.
Select the Ethernet interface and enter the IP address assigned to the N60, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them on the left side of the screen.
5.
Expand the sections to view data directly from the N60 device.
Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct
communications to the N60. This ensures that configuration of the EnerVista UR Setup software matches the N60 model
number.
When direct communications with the N60 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window.
2.
Right-click the Local Area Connection icon and select the Properties item.
3.
Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4.
Set the computer to "Obtain a relay address automatically" as shown.
3-50
N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION
Advertisement
Table of Contents
