Adjust Parameters - JLG 660SJ Service And Maintenance Manual

Press ENTER to select the ACCESS LEVEL menu.
Using the UP or DOWN
digit of the password, 3.
Then using the RIGHT
one space to enter the second digit of the password.
Use the UP or DOWN
ond digit of the password which is 33271.
When correct password is displayed, press ENTER
access level displays the following if password was entered
correctly:
MENU:
ACCESS LEVEL 1
Repeat above steps if correct access level is not displayed or
you can not adjust personality settings.
3121298
arrow keys, enter first
arrow key, position cursor right
arrow key to enter the sec-
. The
SECTION 6 - JLG CONTROL SYSTEM

Adjust Parameters

Once you have gained access to level 1, and a personality item
is selected, press the UP
adjust its value, for example:
DRIVE:
ACCEL 1.0S
There will be a minimum and maximum for the value to
ensure efficient operation. The Value will not increase if the UP
arrow is pressed at maximum value or decrease if the
DOWN arrow is pressed at minimum value for any per-
sonality. If value does not change when pressing up and down
arrows, check access level is at access level 1.
– JLG Lift –
or DOWN arrow keys to
6-5